Other micro-fluidics
Pre-Pulled Glass Micropipettes for Microfluidic Applications
Pre-pulled glass micropipettes with micrometer (µm) diameter tips
Glass micropipettes are available with a range of parameters to meet your research needs for a wide spectrum of technical applications from chemical and biological engineering to electrophysiology and microinjections.
Micropipette (Microcapillary) Options Summary
-
Tips of pre-pulled micropipette inner diameters (ID) ranging from 0.3 to approximately 100 µm. Sold in packs of 30 or 100 pipettes.
-
Borosilicate glass micropipettes options include 1, or 1.5 mm base ODs, 4.5 or 5.5 cm lengths, with or without internal filaments, long tapers with customized tip IDs, and luer locks.
-
Ratio of outer diameter relative to inner diameter at the tip and at the base is: 1.3:1 for each pipette
Specifications
Tip Inner Diameter (ID): 0.3 - 70 µm (depending on request)
Outer Diameter at Base (OD): 1 or 1.5 mm (Use Table Below to chose)
Pipette Length: 4.5 cm (other sizes upon request)
Tolerance of Tips' IDs: ± 20%
Outer Diameter at Tip: Ratio of OD:ID = 1.3
Tip Taper length: 2-5 mm; (5+ mm upon request)
Wall Thickness at Base: 0.17 mm
Glass: Thin-wall borosilicate, with or without internal filament (depending on request). Tip is not fire-polished, base is.
Click on the Part Number in the Table below to chose the pipettes' parameters to order
Part # Tip ID Base OD Filament Part # Tip ID Base OD Filament
um mm (Yes/No) um mm (Yes/No)
0.3um-1mm-4cm-NF 0.3 1 No 0.3um-1.5mm-4cm-NF 0.3 1.5 No
1um-1mm-4cm-NF 3 1 No 1um-1.5mm-4cm-NF 3 1.5 No
10um-1mm-4cm-NF 10 1 No 10um-1.5mm-4cm-NF 10 1.5 No
30um-1mm-4cm-NF 30 1 No 30um-1.5mm-4cm-NF 30 1.5 No
50um-1mm-4cm-NF 50 1 No 50um-1.5mm-4cm-NF 50 1.5 No
70um-1mm-4cm-NF 70 1 No 70um-1.5mm-4cm-NF 70 1.5 No
Part # Tip ID Base OD Filament Part # Tip ID Base OD Filament
um mm (Yes/No) um mm (Yes/No)
0.3um-1mm-4cm-F 0.3 1 Yes 0.3um-1.5mm-4cm-F 0.3 1.5 Yes
1um-1mm-4cm-F 3 1 Yes 1um-1.5mm-4cm-F 3 1.5 Yes
3um-1mm-4cm-F 3 1 Yes 3um-1.5mm-4cm-F 3 1.5 Yes
10um-1mm-4cm-F 10 1 Yes 10um-1.5mm-4cm-F 10 1.5 Yes
30um-1mm-4cm-F 30 1 Yes 30um-1.5mm-4cm-F 30 1.5 Yes
50um-1mm-4cm-F 50 1 Yes 50um-1.5mm-4cm-F 50 1.5 Yes
70um-1mm-4cm-F 70 1 Yes 70um-1.5mm-4cm-F 70 1.5 Yes
Pricing:
30 Pipettes Pack: $289 for most part numbers.
100 Pipettes Pack: $849 for most part numbers.
Pipettes with long tapers (5-10mm) with custom tip IDs generally cost $395-$495.
Mixtures of pipette tip sizes in a 30 pack order can be requested at additional cost (+$30 for two tip sizes, +$60 for 3 tip sizes).
Luer Locks in a 30 pack: cost $90 above base price.
Video on pipette configuration: click here
(Also see Images and Data tab in Product's Page)
Product References
- Macias-Romero C, Nahalka I, Okur HI, Roke S. 2017. Optical imaging of surface chemistry and dynamics in confinement. Science, Aug 25;357(6353):784-788. doi: 10.1126/science.aal4346. Link to article
- Li, Q; Dhakal, R & Kim, J. 2017. Microdroplet-based On-Demand Drawing of High Aspect-Ratio Elastomeric Micropillar and Its Contact Sensing Application. Scientific Reports 7, Article number: 17009 (2017). doi:10.1038/s41598-017-17230-3. Link to article
- Li, Q., & Kim, J. (2017). On-demand Drawing of High Aspect-ratio, Microsphere-tipped Elastomeric Micropillars. In Applied Industrial Optics: Spectroscopy, Imaging and Metrology (pp. AW3A-4). Optical Society of America. Link to article
- Raudsepp, A., Williams, M. A., & Hall, S. B. (2016). Effects of non-Gaussian Brownian motion on direct force optical tweezers measurements of the electrostatic forces between pairs of colloidal particles. The European Physical Journal E, 39(7), 70. Link to article
- Bonvini, S.J., et.al. (2016). Transient receptor potential cation channel, subfamily V, member 4 and airway sensory afferent activation: Role of adenosine triphosphate. Journal of Allergy and Clinical Immunology: Link to article
- Barney Drake, Connor Randall, Daniel Bridge, and Paul K. Hansma. (2014). A new ion sensing deep atomic force microscope. Rev. Sci. Instrum. 85, 083706 (2014); Link to article: Link to article
Terms and Warranty
Warranty: Pre-pulled glass micropipettes are manufactured to substantially conform with descriptions on this webpage. Variability exists in the manufacturing process, estimated from 10-20%, with respect to tip diameter, taper length, and tip angle within and between lots. The customer should communicate any specialized requirements, including variability restrictions within and between lots. Specific applicability, fitness and merchantability are not warranted. Warranty compliance is through replacement, partial or full refund according to Fivephoton Biochemical's discretion.
Orders and Shipping
Please specify inner diameter, base OD, length, with or without filament, regular or long taper and 30 or 100 pipettes options on all orders. FedEx overnight, 2-day and 3-day, FedEx International and USPS international delivery are available. Glass micropipettes manufactured by FIVEphoton Biochemicals can also be ordered through Fisher Scientific or VWR by contacting their Customer Support
Sort By:
MGM 0.3um-1mm-4cm-NF MGM 0.3um-1mm-4cm-NF $489.00 |
MICROFLUIDICS CHIP PROVIDER (Microfluidics-Chip-Multi; Parts M-01 to 05,YM-01,ST-02, and Y-Shape; kw microfluidics, chip) Microfluidic-Chip-Multi $345.00 |
Showing 1 to 2 of 2 (1 Pages)