Human Klotho (KL) ELISA Kit (Part hKL-ELISA)
Human Klotho (KL) ELISA Kit
Product name |
Human KL(Klotho) ELISA Kit
|
||||||||||||||||||||
Catalogue No. |
hKL-ELISA
|
||||||||||||||||||||
Alias |
KL ELISA Kit, klotho ELISA Kit, KLOTHO ELISA Kit
|
||||||||||||||||||||
Detection method |
Sandwich ELISA, Double Antibody
|
||||||||||||||||||||
Application |
KL ELISA Kit allows for the in vitro quantitative determination of KL concentrations in plasma, tissue homogenates and other biological fluids.
|
||||||||||||||||||||
Size |
96T
|
||||||||||||||||||||
Range |
7.8-500pg/ml
|
||||||||||||||||||||
Sensitivity |
< 4.688pg/ml
|
||||||||||||||||||||
Standard curve |
Human KL(Klotho) ELISA Kit |
||||||||||||||||||||
Storage |
4 ℃ for 6 months |
||||||||||||||||||||
Recovery |
Matrices listed below were spiked with certain level of KL and the recovery rates were calculated by comparing the measured value to the expected amount of KL in samples.
|
||||||||||||||||||||
Linearity |
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of KL and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
|
||||||||||||||||||||
CV(%) |
Intra-Assay: CV<8%
|
Kit Components Item Specifications (48T/96T)
-
Storage Micro ELISA Plate (Dismountable) 8×6 or 8×12 4°C/-20°C
-
Lyophilized Standard 1 vial or 2 vial 4°C/-20°C Sample
-
Standard dilution buffer 10ml/20ml 4°C
-
Biotin-detection antibody (Concentrated) 60ul/120ul 4°C
-
Antibody dilution buffer 5ml/10ml 4°C
-
HRP-Streptavidin Conjugate(SABC) 60ul/120ul 4°C (light sensitive)
-
SABC dilution buffer 5ml/10ml 4°C TMB substrate 5ml/10ml 4°C (light sensitive)
-
Stop solution 5ml/10ml 4°C
-
Wash buffer (25X) 15ml/30ml 4°C
Protocol Summary
1. Wash plate 2 times before adding standard, sample and control (zero) wells!
2. Add 100μL standard or sample to each well and incubate for 90 minutes at 37°C
3. Aspirate and wash plates 2 times
4. Add 100μL Biotin-labeled antibody working solution to each well and incubate for 60 minutes at 37°C
5. Add 100 μLSABC Working Solution into each well and incubate for 30 minutes at 37°C
6. Aspirate and wash plates 5 times
7. Add 90μL TMB Substrate. Incubate 15 -30 minutes at 37°C
8. Add 50μL Stop Solution. Read at 450nm immediately
9. Calculation
Shipping: Overnight, 2-day with ice pack, international shipping
Storage: 4oC
Safety: Contains sulfuric acid. TMZ. Avoid contact. Wear eye protection, gloves